Gear Pumps

  • DGD09 Series

    DGD09 Series

    The DGD09 series direct drive gear pumps derive from the well established mag drive MG200 series. Built to handle clean water and relatively viscous fluids at low pressure, the DGD09 series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 70 °C (158 °F). The extreme compactness of its design makes it the preferred choice where space is limited. Suction/discharge ports are 8 mm barbed end.

    More info

  • DGM09 Series

    DGM09 Series

    The DGM09 series magnet drive gear pumps derive from the well established mag drive MG200 series. Built to handle clean water and relatively viscous fluids at low pressure, the DGM09 series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 95 °C (203 °F). The pump housing and the gears are made of Vectra. Seals are available in NBR, EPDM or VITON®. The seal less design is guarantee of reliability. Suction/discharge ports are 8 mm barbed end.

    More info