Dewatering Pumps

Grundfos Unilift CC, KP, AP, KPC

This series consists of sealless vertical pumps that are easy to assemble, affordable and require little maintenance.

Grundfos SLV Series

The SLV Super Vortex range of pumps range have been designed and manufactured to be an effective solution for the pumping of liquids with a high concentration of solids, fibres, or gassy sludge.

Grundfos SL Series

The SL range is designed for the transfer of domestic, municipal and industrial wastewater, drainage and groundwater, and process water.

Grundfos SEV

The Grundfos range of SEV pumps is designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

Grundfos SE1

The Grundfos range of SE1 pumps is designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

Gorman Rupp HS Series

Gorman-Rupp hydraulic submersible pumps are designed for portable use where electrical power is not always available or where there is a requirement for a submersible pump in a hazardous environment.

The Gorman Rupp HS Series can operate fully submerged in many different types of hazardous locations. Variable Speed Control means the pump speed can be varied to suit job requirements, providing maximum efficiency and minimum fuel consumption.

Balz 500 Series

Fitted, designed and manufactured for heavy-duty effectiveness, the 500 series is a proven pump solution for optimum performance.

Balz 400 Series

Wear-resistant, capable of running dry indefinitely and designed with a patented sealing arrangement that prevents media reaching bearings, the 400 series offers durability and efficiency.

Balz 300 Series

Featuring the unique patented bubble sealing system, the 300 series is primed for peak performance and can be configured for varying immersion depths.

Balz 200 Series

Featuring the unique patented bubble sealing system as well as a urethane and rubber pump casing, the 200 series offers excellent performance and wear resistance.

Balz 100 Series

The BALZ 100 series is manufactured from the very best materials available, providing both excellent wear properties and corrosion resistance. High chrome and urethane wear resistance parts ensure excellent results for arduous pumping solutions.

Tsurumi LSC1.4S

Submersible single-phase lightweight and compact dewatering pumps with 1" Top discharge, Semi vortex/open type impeller (Urethane rubber), fitted with 0.48kW 240V 50Hz Single phase electric motor.

Ebara Right

The Right Series from Ebara is a submersible pump with semi-vortex impeller, handling up to 35 mm solids. Consists of completely stainless steel construction, with double mechanical seal in oil bath.

Ebara DW VOX

The DW Vox Series is a submersible pump with a vortex impeller, handling up to 50 mm solids. It features an all stainless steel construction, with double mechanical seal in oil bath.

Ebara DVS

The DVS Series are submersible semi-vortex pumps that are ideal for wastewater applications containing soft or fibrous solids. They are suitable for industrial wastewater drainage, septic effluent and miscellaneous drainage.

Ebara DS

The DS Series has an open impeller design that provides high heads and efficiencies. The pump is suitable for many sump applications including:- draining wells, lift shafts and tanks, irrigation, drainage, water supply, general transfer of water.

Ebara Best One Vox MA

The Best One Series consists of a domestic sump pump manufactured in 304 stainless steel with a semi-open impeller (Best One) and a Semi Vortex impeller (Best One Vox).It is uitable for many light dewatering applications.

Ebara Best One MA

The Best One MA Series from EBARA is a domestic sump pump suitable for a variety of dewatering applications, including: draining wells, basements, cellars, emptying of tanks and the general transfer of water.

Ebara Best 2-5

Best 2-5 submersible pumps are manufactured in AISI 304 Stainless Steel. They are available in single phase automatic or manual, three phase (manual only). This is a versatile series that is suitable for both fixed or mobile installations.

WEDA S Range Sludge Pumps

The WEDA sludge pumps can handle thick, soft, wet mud or other similarly viscous mixtures of liquids and solids, especially the product of an industrial or refining process.

WEDA D Range Drainage Pumps

The WEDA drainage pumps handle either clean or dirty water, even with small solids with the best performance and efficiency.

Calpeda MP

The MP series of pumps from Calpeda consist of multi-stage centrifugal submersible pumps with pump jacket in chrome-nickel stainless steel, with vertical delivery port.

Calpeda GX Zero

Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve. Suction capability up to 1 mm from the bottom.

Calpeda GXR, GXV

The GXR and GXV series are single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.

Calpeda GXC GXV

The GXC and GXV from Calpeda are single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.

Calpeda GQS GQV

The GQS and GQV series from Calpeda are single-impeller submersible pumps, with a free-flow (vortex) impeller.

Calpeda SDX

Stainless steel construction designed and built for years of trouble free operation designed and built to operate in difficult conditions. Suitable for pumping clean, thin, non-aggressive and non-corrosive liquids without solid particles or fibres. 4SDX, 6SDX, 8SDX and 10SDX models available.

Calpeda 4SDP

Submersible borehole pumps for 4” wells (DN 100 mm), with external jacket in stainless steel AISI 304 and stages in Noryl.

Radial floating impeller with high reliability operating in sandy water.

Tsurumi TM Series

The TM series from Tsurumi has been engineered to effectively withstand corrosion more than its conventional counterparts through its unique combination of titanium stator housing and FRP resin wetted parts. They are ideally suited to seawater and marine applications.

Tsurumi SFQ Series

The SFQ series from Tsurumi is a range of submersible manufactured from heavy duty cast 316 stainless steel pumps that have proven to be an effective solution for the draining of corrosive liquids.

Tsurumi NK Series

The Tsurumi NK series, regularly found on construction sites, consists of single phase heavy-duty, high-head pumps that are used for handling abrasive materials.

Tsurumi LH Series

The LH series from Tsurumi is a reliable designed for superior performance in high-head pump operations. The range offers the LH Series and the LH-W Series.

Tsurumi LB Series

The LB series from Tsurumi is a single phase, light, compact and easy-to-use pump. It is suitable for a variety of draining applications in different environments ranging from civil engineering, and building sites to dewatering wells.

Tsurumi KTZ Series

The KTZ series of submersible drainage pumps is a heavy duty pump suitable for construction work. The cast iron pump body presents a different way of top durability that can not be obtained by the aluminum body pumps. Submersion depth of up to 50m. They are fitted with semi open type impeller (Hi chrome iron)

Lowara DIWA Series

The Lowara range of DIWA pumps consists of submersible pumps that have been designed for clean and slightly dirty water manufactured in AISI 304 stainless steel.

Lowara 1300 Series

The Lowara 1300 series is a submersible pump line that delivers pure performance at outstanding value for sewage and surface wastewater within commercial building applications.

Lowara DOC Series

The Lowara range of DOC pumps is versatile, corrosion-resistant and compact.

Tsurumi KRS Series

The KRS series belongs to Tsurumi's range of efficient submersible drainage pumps manufactured for general construction work. The pumps are available in 3 different ranges including the:

Tsurumi HS Series

The HS series from Tsurumi comes equipped with an agitator and a spiral pump casing. Sand, solids, debris are pumped with minimal wear and clogging.

Tsurumi KTV

The KTV series are compact, three-phase dewatering pumps. Made from aluminium and synthetic rubber, these are the lightest in Tsurumi’s 3-phase, dewatering pump range.

Tsurumi NKZ Series

The NKZ series of high head sand pumps have a spiral pump casing and a shaft mounted agitator for smooth suction of slurry, mud or sand.

Tsurumi HSD Series

The HSD is easy to maintain and has been designed specifically for draining sand-carrying or silt laden water in general construction or similar works.

Tsurumi GSZ Series

Tsurumi's GSZ series features a range of powerful high-volume pumps with a special-steel impeller and a 6-pole motor.

Tsurumi GPN Series

The GPN series is not only durable but offers longevity courtesy of a special-steel impeller and suction plate.

Gorman Rupp Prime Aire

With a variety of sizes and operating ranges, Gorman-Rupp’s extensive line of Prime Aire® and Prime Aire Plus priming-assisted (dry prime) pumps are hard-working, dependable and ready to tackle the toughest applications including large solids and slurries.

Gorman Rupp Value Prime

The ValuPrime from Gorman Rupp is a dynamic, compact, and powerful pump suitable for application in the dewatering needs of the construction, industrial, and agriculture markets. TheFinal Tier IV Isuzu engine make this pump capable of pumping up to 1,500 gpm.

Gorman Rupp U Series

The self-priming centrifugal T Series is highly efficient and suitable for industrial and sewage applications.

Gorman Rupp T Series

Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water.

Gorman Rupp PAH Series

The PAH Series range of pumps from Gorman Rupp are priming-assisted pumps designed and engineered for the most rugged and demanding mining, construction, municipal, agricultural and industrial applications.

Gorman Rupp 10 Series

Gorman-Rupp 10 Series® pumps are specifically designed for handling solids, corrosive liquids and slurries.

Gorman Rupp V & VS Series

The V and VS series of pumps from Gorman Rupp are vertically staged self priming centrifugal pumps with a history of efficient operation.

Gorman Rupp 80 Series

The Gorman Rupp 80 Series range consists of medium head, mild solids-handling, self-priming centrifugal pumps which are designed for non-stop work loads.

Balz 500 Series

Fitted, designed and manufactured for heavy-duty effectiveness, the 500 series is a proven pump solution for optimum performance.

Balz 400 Series

Wear-resistant, capable of running dry indefinitely and designed with a patented sealing arrangement that prevents media reaching bearings, the 400 series offers durability and efficiency.

Balz 300 Series

Featuring the unique patented bubble sealing system, the 300 series is primed for peak performance and can be configured for varying immersion depths.

Balz 200 Series

These submersible pumps with peripheral impellers are characterised by their high pressure and their sealless, low-maintenance construction.

Balz 100 Series

This series consists of sealless vertical pumps that are easy to assemble, affordable and require little maintenance.

KETO K-VS

The K-VS heavy duty vertical sump pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. It is suited for applications that demand greater reliability and durability than conventional vertical process pumps can offer.

KETO K-TVS

The K-TVS series of pumps from KETO are cost-effective and versatile.

Atlas Copco VAR Self Priming Pumps

The Atlas Copco VAR - Self-priming centrifugal pumps are for applications where the main feature is the difficulty in priming.

Atlas Copco PAS Series Pumps

Atlas Copco PAS MF Pumps - Vacuum prime centrifugal pumps system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible.

Atlas Copco PAC H Pumps

The Atlas Copco series of PAC H - Vacuum prime centrifugal pumps system consists of a centrifugal pump and a separator, which enables air to be separated from the liquid and be sucked by a vacuum pump - making automatic priming possible.

Ebara GS Cast Iron End Suction Pump

A versatile high quality pump suitable for many applications where water needs to be transferred or boosted